- 41 -
USE
CHOOSING THE NATION
Upon first start-up, the language, system clock, address and nation of installation must be selected on the inverter. To choose a
nation, select it from the list using the ↑ and ↓ keys. Confirm with the button.
The inverter only begins normal operation at the end of the settings.
Due to continuous product development, the inverter may also be available in nations not listed in “Table 2” in the Appendix. Go
to www.aros-solar.com for the updated list.
After 12 hours of feeding, the choices of nation are locked and disappear from the settings menu. In order to
correct any error after this period, you need to contact technical assistance.
In the event that the law requires the installation of external interface protection, the internal interface protection thresholds may
be expanded by means of the configuration software.
To Next Page
Loading...
Need help?
General
