I N S TA L L A TI O N I N S T R U C TI O N S
Before you start
a) PHYSICAL SPACE
It is important to install the console with sufficient space around it to operate and service the console
easily.
b) AREA IN FRONT OF THE CONSOLE
It is normal to have 8-10" between the front of the console and the front of the table so that a piece of
paper may be laid on the table in front of the console.
c) SCRIPT OR COPY BOARD
Are you going to use a copy bridge that span the top of the console for paper or other objects. A copy
bridge can allow the console to be placed close to the front of the table in tight rooms.
d) ADEQUATE VENTILATION
It is important to provide adequate ventilation to electronic equipment. High temperatures can reduce the
life of equipment.
e) 110V - 220VAC OPERATION
The console comes with a 110VAC-220VAC autosensing external power supply as standard equipment.
f) STATIC
Static discharge to electronic devices can cause damage, reduce performance, or cause noise in the sys-
tem. Proper choice of carpet is an important consideration when building a studio.
g) THE CONSOLE POWER SUPPLY
The console is powered by an external, regulated power supply. The supply simply plugs into the back of
the console. There are no high voltages within the console
4.3
To Next Page
Loading...
Need help?
General