Array electronic SR Series User Manual

Controladores lógicos programables PLC baja gama expandibles entradas digitales AC 74368-SR22MRDC ARRAY Manual Ingles www.viaindustrial.com
Controladores lógicos programables PLC baja gama expandibles entradas digitales AC 74368-SR22MRDC ARRAY Manual Ingles www.viaindustrial.com
Preface
Thank you for purchasing the SR Intelligent Controls Series (SR) of our
company. You are recommended to take some time to read this manual, before
putting the SR in to service. It tells you how to install, program and use the SR. The
SR has, amongst many features, the advantage being able to be operated off line to
prove in service performance before being commissioned into service. When you read
the manual you will find many more advantageous properties of the products, it will
greatly simplify the operation of SR for you.
The SR is a type of intelligent control, which uses function blocks for
programming. It enables the control functions of a PLC to be achieved without the
need for large number of instructions and complicated programming. When several
function blocks are linked together in a specific way, relatively complicated control
functions can be implemented. The programming can be carried out in a logical,
speedy and verifiable manner. Programming can be implemented using a removable
LCD liquid crystal display panel or by use of a computer. The latter approach is
recommended for more complicated control schemes.
SR has a very wide range of applications. It can be used for the automation of
an extensive range of electrical and mechanical equipment, flow control, building
automation and many other fields. The implementation of SR provides for automation
of many aspects of day-to-day life from home through to the commercial,
manufacturing, mining, utility and service sectors of the economy. This manual will
describe in detail the functional characteristics and operating methods for SR.
Notes:
Copyright of this manual and patent of SR Intelligent Controls Series are the property
of ARRAY ELECTRONIC CO., LTD. The reproduction, transmission or use of this
manual or its contents is not permitted without written express written authority.
Our company reserves the right to make changes in design for improvement SR
Intelligent Controls Series without notification.
Suggestions for improvement are welcomed.

Array electronic SR Series Specifications

General

Brand	Array electronic
Model	SR Series
Category	Controller
Language	English

Summary

Preface

Notes

Important notes regarding the manual's content and company policies.

Safety Guidelines

Danger

Indicates hazards resulting in death or severe harm if precautions are ignored.

Caution

Indicates hazards that may result in harm or damage if precautions are not taken.

Warning

Highlights important information related to product handling or documentation.

Chapter I General Introduction to SR

1.3 Specifications and Model of SR Series

Details technical specifications and model designations for the SR series.

1.4 Features of SR

Outlines the key features and capabilities of the SR intelligent controller.

Chapter II Installing and Wiring of SR

2.1 Installing of SR

Provides instructions and methods for physically installing the SR unit.

2.2 Wiring of SR

Explains the procedures for connecting power supply and I/O for the SR unit.

Chapter VII Technical Parameter of SR Series

7.1 Technical Parameter of SR-12MRA/SR-22MRA

Lists technical parameters specific to SR-12MRA and SR-22MRA models.

7.2 Technical Parameter SR-12MRD/SR-22MRD

Details technical parameters for SR-12MRD and SR-22MRD models.

Chapter X Operation & Function of Programming Panel SR-WRT

10.4 Programming Operation of SR-WRT

Covers the operational procedures for programming using the SR-WRT panel.

Chapter I Installation and Uninstallation

1.1 Installation of Super CAD

Instructions for installing the Super CAD programming software.

Chapter II General Introduction to Super CAD

2.1 Operation Interface

Describes the user interface and navigation within Super CAD software.

2.3 Main Functions

Highlights the primary functions and capabilities of the Super CAD software.

Chapter IV Basic Operation

4.2 Edit Function Diagram Program

Explains how to edit function diagram programs using Super CAD.

Chapter IV Instruction of HMI Module

4.2 Application Examples of HMI

Illustrates practical applications and examples of using the HMI module.

4.3 Editing of the HMI

Guides on how to create and edit HMI screens and messages.

Chapter V Voice Module

5.1 Structure of Voice Module

Describes the physical structure and components of the SR-VP voice module.

5.3 Operation Instruction of the Voice Module

Explains the operational procedures and functions of the voice module.

Chapter VI Remote control and extension function

6.1 Remote control function

Explains the wireless remote control capability of the SR system.

6.1.2 Connection Methods for Remote Control

Details how to connect remote control modules to SR and voice modules.

Chapter 6.2 Extension module

6.2.1 The extension module structure

Outlines the physical structure and components of the extension module.

6.2.2 Extension module address setting

Explains how to set addresses for connecting extension modules.