Array electronic SR Series

To Next Page

To Previous Page

Controladores lógicos programables PLC baja gama expandibles entradas digitales AC 74368-SR22MRDC ARRAY Manual Ingles www.viaindustrial.com

4.Don’t’ touch or take down the link bridge SR-CBA/CBD at SR working.

Notes:

1. The connecting voltage of the transistor type output control must be ¨Q24VDC and the

load voltage must be DC.

£®

Each machine can be connected with 5 extension modules, one voice module and a remote

control module at most.

3. The address of the extension module is set to be 1-5. (For details please consult the

contents of Chapter VII)

4. The AC type machine must externally be connected with voice module, extension module and remote control of AC type.

And the same with the DC type machine.

Danger

1.Current safety regulations do not permit the connection of different phases to the input.

2.Power and input must same phases

3.Do not touch the input and output points and power input points at SR working.

Array electronic SR Series - Page 23