Array Solutions PowerMaster II - Page 12

PowerMaster II RF Wattmeter www.arraysolutions.com Rev 4.1 - February 23, 2017
12
To go from one menu to the next, push the MENU button.
.
VSWR Alarm Limit Menu (C1 – Coupler 1)
Push the mode select button to select the VSWR alarm trip
point:
Off
1.5
2.0
2.5
3.0
Push the mode select button to reset the VSWR alarm and
LED
Coupler Type (Coupler 1 shown)
Push the mode select button to select the type of coupler
connected to Coupler 1 input:
3KW
10KW
VHF-1
VHF-2
UHF
QRP-HF
Note: If Coupler 2 was active, you would see the same
options for Coupler 2. More on couplers selection later.