Use 2 Couplers? Menu
Select with mode select button:
No – Use one coupler (Optional: with two identical couplers – see page 22 for details)
Yes – Use any two couplers.
This changes the first menu you will see when pressing the Menu Button to the “Coupler Input
Menu” where you select either Coupler 1 or Coupler 2. Press MODE SELECT to switch from
Coupler Input 1 to Coupler Input 2. The next menu resumes as normal where you can define the
coupler type (See Page 12). Note: The unique settings for each coupler are stored in the Power
Master II’s non-volatile memory.
RS232 Port / USB Virtual Port Baud Rate Menu
Select with mode select button:
9,600
19,200
38,400
It is recommended to use the highest speed available.
To Next Page
Loading...