To Next PageTo Next Page
Need help?Do you have a question about the ARRI 150 and is the answer not in the manual?
General| Brand | ARRI |
|---|---|
| Model | 150 |
| Category | DJ Equipment |
| Language | English |
ARRI lampheads are for professional studio use only and must be operated by qualified persons.
Critical safety warnings for operation, including high voltage, hot lamps, and component checks.
Procedures for safely securing fixtures and accessories in hanging positions using safety cables.
Warning to use only suitable plugs, installed by qualified personnel.
Steps for checking and safely inserting a lamp, ensuring correct wattage and connection.
Instructions on how to loosen, adjust, and tighten the stirrup for desired positioning.
Overview of ARRI lamphead design, performance, cooling, and accessory handling features.
Crucial safety warnings for lamp exchange: disconnect power, allow cooling, handle with care.
Detailed steps for replacing the lamp in the ARRI 150 model.
Detailed steps for replacing the lamp in ARRI 300 PLUS and 650 PLUS models.
Procedure for inserting accessories like barn doors or filters, ensuring secure locking.
Critical warning against operating lampheads with closed barn doors due to overheating risk.
Guidance on cleaning reflector and lens, checking for damage, and maintaining electrical contacts.
Requirement for qualified electricians to perform safety inspections at least every 12 months.
Statement disclaiming manufacturer liability for damages caused by improper operation.
