Need help?Do you have a question about the ARRI ALEXA XT and is the answer not in the manual?
General| Sensor Type | ALEV III CMOS |
|---|---|
| Dynamic Range | 14+ stops |
| Lens Mount | PL mount |
| Recording Formats | ARRIRAW, ProRes |
| Power | 10.5 to 34 V DC |
| Sensor Size | Super 35 |
| Resolution Options | 2K, HD |
| Frame Rates | 0.75 - 120 fps |
| Power Consumption | Approximately 85 W |
| Outputs | HD-SDI, MON OUT |
Details the meaning of warning symbols used in the manual and on the equipment.
Provides fundamental safety rules for operating the ALEXA system to prevent injury.
Lists specific safety precautions related to handling and operating the camera system.
Explains how the camera manages multiple onboard power sources simultaneously.
Lists essential accessories and components for operating the ALEXA camera.
Details the features and functionality of the ALEXA's electronic viewfinder.
Information on using SD cards for firmware and data storage.
Information on the XR module for extended recording capabilities.
Details the primary camera control interface on the camera's right side.
Describes the secondary control interface located on the camera's left side.
Explains the controls and interface of the electronic viewfinder.
Information and recommendations for internal recording operations.
Details on outputting video signals to external recorders.
Explains simultaneous internal and external recording workflows.
Information on operating the camera at high frame rates.
Covers monitoring options via EVF and MON OUT.
Guidance on utilizing timecode for synchronization and logging.
Instructions for synchronizing sensor data between two cameras.
Details on synchronizing camera settings over Ethernet.
Instructions for changing between 16:9 and 4:3 sensor modes.
To Next Page