Need help?Do you have a question about the ARRI Amira and is the answer not in the manual?
General| Dynamic Range | 14+ stops |
|---|---|
| Frame Rates | 0.75 - 200 fps |
| Base ISO | 800 |
| Recording Media | CFast 2.0 cards |
| Sensor Type | Super 35 CMOS |
| Resolution | 3.2K (3200 x 1800) |
| Recording Formats | ProRes 4444, ProRes 422 HQ, ProRes 422, ProRes 422 LT |
| Lens Mount | PL mount |
| Weight | Approx. 4.1 kg (9 lbs) |
| Shutter Type | Electronic shutter |
| Built-in ND Filters | 0.6, 1.2, 2.1 |
| Power Consumption | Approx. 50 W |
| ISO Range | 200-3200 |
| Audio | 2x XLR inputs |
Explains safety warnings, symbols, and signal words used in the manual.
Lists critical safety measures for operating the camera to prevent hazards.
Outlines general safety advice for camera handling and environmental conditions.
Lists new features and fixes introduced in Software Update Packet 2.0.
Shows locations of serial numbers and compliance labels on the camera.
Step-by-step guide for attaching and detaching Gold Mount batteries.
Step-by-step guide for attaching and detaching V-Lock batteries.
Details the 12-pin Hirose and 3-pin Fischer RS connectors at the front.
Describes headphone output and XLR inputs for audio connections.
Explains the various Input/Output ports like 12V, SDI, and TC.
Covers CFast card slots, USB ports, and Ethernet connection.
Explains the operation of the internal ND filter density switch.
Step-by-step guide for mounting and dismounting PL and EF lenses.
How to control lens iris manually, via user button, or auto iris.
How to check audio status and configure input/output channels.
Adjusting the headphone volume using the control panel.
Accessing audio information screen and status indicators.
Configuring gain, filtering, and input mapping for channels 1 and 2.
Configuring gain, filtering, and input mapping for channels 3 and 4.
General audio setup options including recording, test tone, and display.
How the viewfinder displays image and status data.
Activating the peaking function for focus assistance.
Using the exposure tool for evaluating image exposure levels.
Assigning functions to viewfinder user buttons.
Steps to start and stop video recording.
How to play back recorded clips using the PLAY button.
Shows key camera data like recording, voltage, and status icons.
Adjusting the brightness of the camera's monitor display.
Communicates critical system states requiring immediate user action.
Accessing detailed information on version, system, media, USB, network, and lens data.
Adjusting the camera's sensor frame rate.
Configuring timecode formats, project rates, and modes.
Adjusting shutter angle or exposure time for controlling motion blur.
Adjusting white balance and color compensation settings.
Applying creative color looks and adjusting gamma curves.
Adjusting the camera's exposure index (ISO sensitivity).
Selecting the desired ProRes recording codec and color depth.
Choosing between HD, 2K, 3.2K, and 4K UHD recording resolutions.
Configuring project-wide settings like rate and identifiers.
Activating and configuring the pre-recording buffer function.
Irreversibly deleting all data from CFast cards.
Removing the most recently recorded clip from a CFast card.
Creating the correct folder structure for USB memory sticks.
Settings for the electronic viewfinder and onboard monitor.
Configuring SDI output formats, frame rates, and scan types.
Setting up aspect ratio guides and custom framing rectangles.
Adjusting image sharpness, detail, denoising, and Genlock settings.
Optimizing camera cooling based on shooting conditions.
Configuring button illumination and display style.
Managing installed licenses for advanced camera features.
Installing software update packages (SUP) for the camera.
Enabling or disabling camera controls to prevent accidental changes.
Assigning functions to individual user buttons for quick access.
Details on the EI, WB, ND, and US switches and their functions.
Assigning FPS, Shutter, or Look functions to the US switch.
Configuring preset values for specific switch positions.
Triggering and configuring automatic white balance calculation.
How to position and secure the electronic viewfinder.
Adjusting balance for stable mounting and handling.
Attaching the camera to a wedge plate using an adapter.
Mounting and unmounting battery adapters (V-Lock and Gold Mount).
Connecting and changing the electronic viewfinder and its cable.
Procedures for safely changing the camera's lens mount.
Step-by-step instructions for updating camera software.
How to enhance camera capabilities with licensed features from ARRI.
Physical dimensions and weight of the camera.
Technical specifications for power input, output, and operation.
Diagrams showing pin configurations for camera connectors.
To Next Page
