To Next PageTo Next Page
Need help?Do you have a question about the ARRI Arriflex 435 Advanced and is the answer not in the manual?
General| Film Format | 35mm |
|---|---|
| Lens Mount | PL Mount |
| Power Supply | 24V DC |
| Viewfinder | Optical Viewfinder |
| Camera Type | Film Camera |
| Shutter Angle | 11.2° to 180° |
| Magazine | 400ft or 1000ft |
| Frame Rates | 1-150 fps forward / 1-75 fps reverse |
| Shutter | Rotating Mirror Shutter |
Covers general warnings, safety precautions, and handling of the camera.
Provides crucial reminders for safe operation and maintenance.
Details specific product information and model compatibility.
Covers setting up and using the camera for shoulder-mounted operation.
Details batteries, chargers, mains units, and accessory power supply options.
Lists compatible magazines and their operational specifications.
Provides step-by-step instructions for loading the ARRIMAG 120 magazine.
Explains the procedure for safely removing exposed film from the magazine.
Describes the mirror shutter's electronic adjustment and capabilities.
Explains how to check and operate the shutter locking mechanism.
Details the process of setting various mirror shutter angles directly on the camera.
Covers lens compatibility, mounting procedures, and support.
Details the viewfinder system, its adjustability, and optional features.
Details how to start and stop the camera using the RUN button.
Covers displaying and setting camera operational parameters via the display.
Covers setting standard and programmable frame rates.
Details selecting standard frame rates and setting programmed ones.
Explains switching between forward/reverse and fine-tuning frame rates.
Discusses system limits and precautions for motion control operation.
Explains the installation of the MCI-1 for motion control modes.
Lists the functions controllable via the Camera Control Unit CCU-1.
Provides steps for replacing CCU-1 batteries and connecting the unit.
Details CCU-1 key functions, error displays, and the main menu.
Explains how to set frame rates using the CCU-1 SPEED menu.
Details how to set shutter angles using the CCU-1 SHUTTER menu.
Covers CCU-1 REMOTE and TIMECODE menu operations.
Explains writing and storing programs (ramps) using the CCU-1 PROGRAM menu.
Describes how to set user-defined ramping parameters using the CCU-1.
Covers automatic program calculation for speed ramping and exposure compensation.
Explains how to activate and run stored programs using the CCU-1.
Explains the functionalities and usage of the RCU-1 remote control unit.
Details the features and remote control capabilities of the WRC-1.
Covers the functions and capabilities of the LCC software.
Explains setting time code and user bits via CCU-1, LCC, or external source.
Instructions for cleaning the camera's film gate.
