48
Viewfinder System
The viewfinder system on the ARRIFLEX 435 Advanced can be
swivelled in two axes. The viewfinder image is always up-
right and correct left-to-right when the viewfinder is swivelled
within the main axes ➪ photo.
A warning signal (red LED) for asynchronous running is re-
flected into the viewfinder.
An 80/20 beamsplitter for b/w video cameras is integrated
into the viewfinder system. For colour video cameras, a
beamsplitter with a ratio of 50/50 is also available, and
can be fitted by a service center.
The entire viewfinder system can be replaced by a video
finder (100%). An anamorphic viewfinder arm is also
available.
An ARRIGLOW module is available as an option.
Using slide-in masks, the filming format currently in use can
be displayed in the viewfinder as an illuminated frame with
continuously adjustable brightness. The ARRIGLOW also
displays the warnings ASY (asynchronous running), BAT
(supply voltage too low) and END (end of film) in the
viewfinder.
Optics
To Next Page
Loading...
Need help?
General