103
Wireless Remote Control WRC-1
The Wireless Remote Control WRC-1 is a handy remote
control unit for use with all of the latest generation of
ARRIFLEX camera models: ARRIFLEX 16SR 3/Advanced,
16SR 3 HS/Advanced, 535, 535B, 435 Advanced, 435ES
It enables the user to remotely control:
• the camera speed,
• the shutter angle of the mirror shutter, and
• the aperture of the lens (iris),
providing a wide range of compensation options for
constant exposure.
The range of functions offered by the WRC-1 is automatically
adapted to the limits of the camera and the lens control motor
to which it is connected. The large handwheel permits sensitive
adjustment of operational values, and easy programming
of end-stops for user-defined minimum and maximum values.
The illuminated LCD provides quick, precise and compre-
hensive information about all the settings, the status of the
camera and the WRC-1, including all warnings.
The WRC-1 is the perfect addition to the ARRI Wireless
Lens Control System. Connected to the Wireless Main Unit
WMU-1 of the Wireless LCS it enables all functions to be
remotely controlled. The WRC-1 can also be connected to
the camera via cable using the Wireless Handgrip Attach-
ment WHA-1 of the Wireless LCS system. However, the lens
remote-control functions are not available in this mode.
Note: The WRC-1 will always operate in the standard
ramping speed. Operation in HI or LO is not
possible.
Accessories
To Next Page
Loading...
Need help?
General