82
Work Light WL-3
• Screw the dovetail-adapter to the handgrip.
• Slide the work light into the dovetail-guide and clamp.
• Connect the plug to the “RS”-socket ➪ photo.
• By adjusting the flexible arm, bring the work light into
the desired position. The work light can be turned on and
off with the ring on the lamp head ➪ photo. The bright-
ness of the work light can be adjusted with the mechanical
aperture.
Accessories
Work Light WL-3
RS-socket
To Next Page
Loading...
Need help?
General