Arris CHP-SMM-2 User Manual

CHP Max
™
Headend Optics Platform
Chassis, Controllers and Power Supplies
Equipment Manual
1508685 Revision D

Arris CHP-SMM-2 Specifications

General

Product Type	System Management Module
Category	Multi-service Platforms
Model	CHP-SMM-2
Manufacturer	Arris
Operating Temperature	0°C to 50°C
Type	Management Module
Compatibility	CHP Headend Platform
Ports	Ethernet, Serial
Input Impedance	75 Ohms
Output Impedance	75 Ohms

Summary

Chapter 1 Introduction

Tools and Equipment

Lists all necessary tools and equipment for operation and maintenance.

CORView Lite Element Manager Software

Craft Management Software Functions

Explains the functions of the Craft Management Software.

Chapter 2 CHP MAX5000 CHASSIS (REAR FIBER VERSION)

Chapter 3 CHP MAX5000 CHASSIS (FRONT FIBER VERSION)

Precautions

CHP Chassis Installation

Details the procedures for installing the CHP chassis into a rack.

Module Installation

Covers the process of installing various modules into the chassis.

Maintenance

Chapter 4 CHP MAX AC POWER SUPPLY

Chapter 5 CHP MAX DC POWER SUPPLY

Equipment Description

Installing/Removing the Power Supply Module

Details procedures for installing and removing the power supply module.

Chapter 6 CHP MAX ELEMENT MANAGEMENT MODULES CHP-CMM, CMM-1, SMM, and SMM-1

Local Monitoring

Explains how to perform local monitoring of the chassis.

Auto Config

CHP Max Craft Management Software

Details the usage of the CHP Max Craft Management Software.

Management Modules Configuration

Updating the SMM, SMM-1 Firmware

Chapter 7 SYSTEM MANAGEMENT MODULE 2 (SMM-2)

Installation/Replacement of the SMM-2

Details the procedures for installing and replacing the SMM-2.

CLI Commands

SNMP Configuration and Operation