ARRIS FPV250 V2.0 Assembling Manual
Thank you for purchasing ARRIS FPV250 FPV Racing Quad copter. This is the 2.0
version, we have upgraded the flight controller to SPRacing F3, which is more
effective and responsive. Here is a simple assembling manual to assemble it.
Before we start, please prepare the following tools:
1.5mm screw driver x 1
2.0mm screw driver x 1
3.0mm sleeve x 1
Scissors x 1
Tweezers x 1
Thread Lock
The picture below includes all the frame plate required, we need to assemble
them to be a whole frame.
To Next Page
