Wood dowel x4
Assembly Instructions
Auntie Sewing Machine Cabinet Page 4
FIG. 2
FIG. 2A
Step 2. Place parts shown below on a flat surface
and install Cams (21 total) into the holes provided
(shown in FIG. 2) in the cabinet parts shown
below, pushing a cam into each hole until flush
with the surface. The arrow on the Cams should
be turned (using a regular screwdriver or Allen
Key Provided) to face the hole in each edge where
the Connecting Bolts will enter. See top of page 3
for installation of cams.
After attaching the runners, insert the wood
dowels (4) in the Front Brace (Q) & Back Brace (P),
shown in FIG. 2A.
Cams x21
To Next Page
