Arrow MT300 - Specific Safety Rules; Hot Glue and Surfaces; Eye Protection; Lung Protection

3
BACK TO
INDEX
1 Do not touch nozzle area or melted glue – Temperature reaches 177°C (350°F).
2 Hot tip can damage painted and other surfaces. Use support stand.
3 Always wear safety glasses with side shields. Everyday glasses have only impact resistant lenses. They are NOT safety glasses. Following this rule will
reduce the risk of eye injury.
4 Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.
SPECIFIC SAFETY RULES