13
| Contents - REEL HUB & REELS |
REELS 135 & 120
The Reels allow winding of the lm inside the Tank.
The Reels are designed to grant homogeneous ux
during developing.
The 135 Reels feature external wings to aid agita-
tion of liquids.
The 120 Reels are optimised to leave as much room
as possible for the lm.
REELS 135 REELS 120
REEL HUB
The multiformat hub allows you to mount reels 135 or 120 depending on the lm format you
want to develop. The 135 reels will lock on the inmost grooves.The 120 reels in the outmost
grooves. On both sides there are an “L” (le) and an “R” (right) and two arrows that will match
those on the reels in order to mount correctly. The R side of the hub, where a star shape in the
hole is, must appear to match the side of the tank knob.
At the center of the hub there are two slits to facilitate the ow of chemicals. In the smaller
slot the strip is hooked with the clip that will wrap around the hub when the lms are loaded
into the spirals.
To Next Page
Loading...