1. Insert the charger's plug to the power outlet, the red and green lights flash, then the green
light remains on, the red goes out, which shows the charger is working, you can now charge the
battery.
2. Insert the battery’s balance plug into the correct charging port as shown, the red light
comes on which shows battery is charging.
3. Charge the battery for about one and a half hours, when red light goes out, the battery is
charged.
Safety Instructions for Your Li-Po Charger
1. Keep the charger away from water or other liquids.
2. Do not attempt to use the incorrect voltage input, or charge a non-suitable battery.
3. Do not insert anything into the cooling vents of the charger.
4. Charge on a non-flammble surface.
5. Only charge 1 battery at a time.
6. The charger is for Li-Po batteries only.
7. The charger should be kept out of the reach of children
8. Do not leave the battery and charger unattended during charging.
9. If anything abnormal occurs, stop charging immediately.
(Battery getting hot, battery swelling)
10. Do not disassemble the charger.
11. Do not attempt to charge a warm battery.
(for 2 or 3 cell batteries)
To Next Page
Loading...
