Why is the control range limited on my Art-Tech Toy?
If the control range of your Art-Tech Toy is limited, it's likely that the batteries in the transmitter are running low. Try installing new dry cells to resolve this issue.
How to fix motor that does not run on Art-Tech CESSNA-182?
If your Art-Tech Toy motor isn't running, there are a few potential causes. First, ensure that the battery in the plane is fully charged. If it is, check the transmitter's batteries and install new dry cells if they're flat. If neither of these solutions work, the circuit in the model may have been damaged due to a crash, and you should contact the distributor.
What to do if Art-Tech Toy cannot climb?
If your Art-Tech Toy cannot climb, the battery might not be fully charged, so try charging it. Alternatively, the elevator may be angled downward. Adjust the elevator trim on the transmitter to correct this.
Why Art-Tech Toy cannot fly straight?
If your Art-Tech Toy cannot fly straight, it might be because the rudder or elevator is not in the center position; adjust the trim switch on the transmitter. Another possibility is that the main wing hasn't been installed on the fuselage properly. In this case, take off the main wing and put it on again, ensuring it's flush with the fuselage sides.
To Next Page
General
