-7-
2. Apply some glue on the elevator
position of fuselage,
3.Spread apart the tail of fuselage a little
up, and insert the elevator into the
fuselage.
Fuselage, main wing, elevator, rudder, transmitter, battery, charger, landing gear, wheel,
propeller, glue
Assembly
Main parts of Ce ssna
Glue the Horizontal Tail
1. Inspect the elevator opening. Make sure that the top of the rudder and elevator opening
has a micro separation. If not make a gentle slice through it as shown in picture. Insert
Elevator into fuselage (body). (Make sure control horn is facing down when doing so)
You may need to slightly bend the elevator flap up to properly insert into fuselage opening.
Apply the included glue to secure the tail into place.
To Next Page
Loading...
