Glue the Vertical Tail
3.Attach the rudder into the fuselage.
1.Apply some glue on the rudder position of fuselage
-8-
2.Apply some glue on the mounting
tabs of the rudder
4. Next apply glue to bottom edge of Rudder and
slide into fuselage. Make sure rudder is
perpendicular to body. Glue may take 12 hours to
fully cure. If quicker results are needed you may
use a 5 Minute epoxy to that can fully cure in 16
minutes. Epoxy is also stronger than the included
kit glue.
To Next Page
Loading...
