Need help?Do you have a question about the Art CX311 and is the answer not in the manual?
General| Maximum Input Level | +22 dBu |
|---|---|
| Maximum Output Level | +22 dBu |
| Input Impedance | 10kΩ |
| Frequency Response | 20Hz - 20kHz |
| THD | <0.005% @ +4dBu |
| Power Requirements | 50/60Hz |
| Dimensions | 1.75" x 19" x |
| Type | Stereo 2-Way/Mono 3-Way Crossover |
Highlights the key capabilities and design aspects of the CX311 crossover.
Instructions for connecting the unit to the AC power supply.
Details on connecting audio signals via XLR and 1/4" jacks.
Explanation of all controls and switches located on the front of the CX311.
Description of the physical input and output connectors on the rear panel.
Guidance on setting up the crossover in a standard stereo system configuration.
Illustrates the typical path of audio signals through the system.
Step-by-step advice for the initial configuration and testing of the unit.
Details the terms and duration of the product warranty.
Specifies conditions under which the warranty is void or does not apply.
To Next Page
