11
SPECIFICATIONS
Input Connections XLR, 1/4” TRS, balanced
Output Connections 1/4” TS, unbalanced
Frequency Response 10Hz to 40kHz, +0/-0.5dB
Crossover Frequency Range 250Hz to 6kHz
Subwoofer Frequency Range 50Hz to 250Hz
Crossover Filter Type Fourth-order Linkwitz-Riley, 24dB/octave
Subwoofer Filter Type Two-pole Butterworth, 12dB/octave
Dynamic Range >114dB
Signal to Noise Ratio >95dB, Ref: 0dBu, 20Hz-20kHz, unweighted
Input Impedance 100k Ohms
Output Impedance 220 Ohms
Maximum Input Level +21dBu
Maximum Output Level +21dBu
Total Harmonic Distortion (THD) <0.01% (20Hz-20kHz, 0dBu)
Maximum Gain +4dB
Power Requirements 110-125V AC, 50-60hz, 15W (USA)
Export units configured for country of destination
Dimensions (HWD) 1.75” x 19” x 5”
44mm x 483mm x 127mm
Weight 6.2 lbs. (2.8 kg)
ART maintains a policy of constant product improvement. ART reserves the right to make changes in
design or make additions or improvements to this product without any obligation to install these
changes on products previously manufactured. Therefore, specifications are subject to change
without notice.
To Next Page
Loading...