6
SPECIFICATIONS
Input Connections XLR-F balanced (3), ¼-inch unbalanced (2), RCA (6),
1/8-inch balanced (1)
Output Connections ¼-inch TRS balanced (2), ¼-inch unbalanced (1), RCA (2)
Input Impedance 600/22K Ohms Mic/Line XLR inputs, 10K Ohms RCA inputs,
22K Ohms ¼-inch EFX Returns
Output Impedance 50 Ohms ¼-inch Main outputs, 1K Ohms RCA Record outputs,
100 Ohms EFX output
Maximum Input Level -10dBu/+20dBu Mic/Line XLR inputs, +20dBu RCA line inputs,
+20dBu EFX inputs
Maximum Output Level +24dBu balanced Main outputs, +20dBu RCA Record outputs,
+20dBu EFX output
Phantom Power +15 Volts DC, regulated low noise
Maximum Gain 56dB/26dB Mic/Line, 26dB RCA inputs
Signal to Noise Ratio >90dB typical
THD <1% typical
Equalizer Range +/-12dB @ 100Hz & 10KHz
Bluetooth v5.0, up to 30M range, Class 2 device
Power Requirements USA: 105 to 125 VAC / 50-60Hz, 15 Watts typical. Export units
configured for country of destination
Dimensions (HWD) 1.75-inch x 19.0-inch x 6.0-inch
5mm x 483mm x 152mm
Weight 6.2 lbs. (2.8kg)
Note: 0 dBu = 0.775Vrms
ART maintains a policy of constant product improvement. ART reserves the right to make changes in
design, or make additions to, or improvements upon, this product without any obligation to install same
on products previously manufactured. Therefore, specifications are subject to change without notice.
To Next Page
Loading...
