Plug the DC output cable from the Power adaptor into the DC IN jack on the
rear panel of your instrument, then plug the Power adaptor into a convenient
wall AC power socket.
With the piano assembled and plugged into a power outlet, adjust the [Power
On/O(VOLUME)] knob to turn on or turn o the piano.
You can adjust the volume by turning the [Power On/O(Volume)] knob to
the right or to the left.
2. USB TO HOST Jack
3. Aux In Jack
4. Pedal Jack
5. Headphone Jack
6. DC 10V Input Jack
To Next Page
Loading...
