45
System Related Messages
Program Memory Failure – M022*
Call your dealer for service.
The Settings Have Been Reset – M021*
Call your dealer for service if this message appears on more than one power-up.
The Clock has Failed – M020*
Call your dealer for service.
Configuration Error (Spa Will not Start)
Call your dealer for service.
The RCD Test Failed (System Could Not Test the RCD) – M036* (North America
Only)
May indicate an unsafe installation. Call your dealer for service.
A Pump May be Stuck On – M034*
Water may be overheated.
POWER DOWN THE SPA! DO NOT ENTER THE WATER!
Call your dealer for service.
Hot Fault – M035*
A pump appears to have been stuck on when the spa was last powered on. Water may
be overheated.
POWER DOWN THE SPA! DO NOT ENTER THE WATER!
Call your dealer for service.
To Next Page