EasyManua.ls Logo

ARTEX ME406 Service Manual

ARTEX ME406
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Page 1 of 72
Mar 19/2015
570-1600 Rev. V
Initial Issue JUN 30/2005
ARTEX PRODUCTS / ACR ELECTRONICS, INC.
5757 Ravenswood Rd, Ft. Lauderdale, FL 33312
Cage Code: 18560
25-62-30
ME406 Series
Emergency Locator Transmitter
Description, Operation, Installation and Maintenance Manual
This manual includes data for the equipment that follows:
Component Part No. Model No.
Emergency Locator Transmitter 453-6603 ME406
Emergency Locator Transmitter 453-6604 ME406HM

Table of Contents

Other manuals for ARTEX ME406

Question and Answer IconNeed help?

Do you have a question about the ARTEX ME406 and is the answer not in the manual?

ARTEX ME406 Specifications

General IconGeneral
Battery TypeLithium
Battery Replacement Interval5 years
Operating Temperature Range-20°C to +55°C
ActivationManual
TypeEmergency Locator Transmitter (ELT)
Frequency406 MHz and 121.5 MHz
Battery Life48 hours (continuous operation)

Summary

ME406 Series Emergency Locator Transmitter

Description, Operation, Installation and Maintenance Manual

Overall manual scope covering product description, operation, installation, and maintenance.

Introduction

Description and Operation

Description

Overview of the ELT's function, components, and system architecture.

Components

Identification and description of the main parts of the ELT system.

Operation

Detailed explanation of how the ELT operates, including activation, reset, and checks.

Specifications

Technical specifications covering environmental, physical, electrical, and antenna parameters.

Test and Fault Isolation

Inspection and Test Regulatory Requirements

Regulatory requirements for ELT inspection and testing in different regions.

Inspection and Test Procedures

Step-by-step guide for performing ELT inspections and tests.

Fault Isolation

Guidelines for diagnosing and troubleshooting ELT faults and error codes.

Removal

Installation

Regulatory Requirements and Guidelines

Overview of regulations and guidelines for ELT installation.

Mounting Tray

Guidance on selecting a location and installing the ELT mounting tray.

Antenna

Procedures for selecting, locating, and installing the ELT antenna.

Remote Switch

Steps for locating and installing the cockpit remote switch.

Wiring

Considerations and procedures for wiring the ELT system components.

ELT Installation

Final steps for installing the ELT into its mounting tray and testing.

Battery Pack Installation

Procedures for installing the ELT battery pack, both new and reinstallation.

Appendix A – ELT Registration

Illustrated Parts List

Related product manuals