The provided manual describes the assembly of the ARTICLE. FULTON Dining Table For 8, Extendable. This is a piece of furniture designed for dining, capable of accommodating eight people, and features an extendable design for increased versatility.
Function Description:
The FULTON dining table serves as a central piece of furniture for dining areas, providing a stable and spacious surface for meals, gatherings, and other activities. Its primary function is to offer seating for up to eight individuals, making it suitable for families and entertaining guests. The key feature of this table is its extendable design, which allows users to adjust the table's length to suit different needs and space requirements. This extendability is achieved through the incorporation of "leaves" that can be added or removed from the main table top. When extended, it provides a larger surface area, and when the leaves are removed, it compacts to a smaller size, offering flexibility in room layout and usage. The table's structure is supported by a robust leg system, designed for stability and durability. The assembly process involves attaching the legs to the table top and then integrating the extendable leaf mechanism.
Important Technical Specifications:
While the manual does not provide explicit dimensions or material specifications, it does detail the components required for assembly, which gives insight into its construction.
- Table Top (Part 1): This is the main surface of the dining table. The extendable nature implies a mechanism within or beneath the table top to accommodate the leaves.
- Center Leg (Part 2), Left Leg (Part 3), Right Leg (Part 4): The table utilizes a multi-leg system, with two center legs, two left legs, and two right legs, suggesting a sturdy and balanced support structure. The illustrations show a distinct, modern design for the leg frames, likely made of metal given the use of bolts for attachment.
- Leaf (Part 5): The table includes two leaves, confirming its extendable functionality. These leaves are inserted into the table to increase its length.
- Leveler (Part 6): Six levelers are provided, indicating that the table's height can be adjusted to ensure stability on uneven floors.
- Adjust Bolt (Part 7): Four adjust bolts are used, likely for securing the leaves or other adjustable components of the table.
- Hardware:
- Allen Key (Part A): A common tool for furniture assembly, indicating the use of hex-head bolts.
- 1/4" x 19" MM Bolt (Part B): Sixteen of these bolts are used, suggesting numerous secure connection points for the legs and frame.
- Lock Washer (Part C): Twelve lock washers are included, which help prevent bolts from loosening over time due to vibration or movement, enhancing the table's long-term stability.
- Washer (Part D): Sixteen standard washers are used, distributing the load of the bolts and protecting the material from damage during tightening.
The assembly time is estimated at 30 minutes, and it is recommended for 2 people to assemble, suggesting a moderately complex but manageable assembly process. The difficulty level is rated as 3 out of 5, indicating it's not the simplest assembly but also not overly challenging.
Usage Features:
- Extendable Design: The primary usage feature is its ability to extend, allowing it to transition from a smaller footprint to a larger dining surface. This is ideal for accommodating varying numbers of guests or for different occasions. The manual shows the leaves being pulled out from the ends of the table and then secured.
- Seating for 8: When fully extended, the table is designed to comfortably seat eight people.
- Stability: The multi-leg structure combined with the use of lock washers and levelers ensures a stable dining surface, minimizing wobbling or unevenness.
- Modern Aesthetic: While not explicitly stated, the clean lines and minimalist design depicted in the illustrations suggest a contemporary aesthetic that would fit well in modern dining spaces.
- Adjustable Levelers: The inclusion of levelers allows users to fine-tune the table's height and stability on various floor types, preventing rocking. The manual specifically highlights the need to "Adjust levelers as needed" during assembly and to "Adjust same level" in the final step, emphasizing the importance of a level surface.
Maintenance Features:
The manual primarily focuses on assembly and does not detail specific maintenance instructions for the finished product. However, general best practices for furniture care can be inferred:
- Gentle Handling During Assembly: The instruction to "place all parts on a soft, clean, and flat surface such as a carpet to prevent scratches" during assembly implies that the table's surfaces, particularly the table top, are susceptible to scratching and should be handled with care. This suggests that in regular use, users should employ placemats, coasters, and avoid dragging abrasive objects across the surface to maintain its appearance.
- Secure Fasteners: The use of lock washers and the recommendation to tighten bolts securely during assembly indicate that periodic checks of the fasteners might be beneficial to ensure the table remains stable over time. Loose bolts could lead to instability or damage.
- Leveling: The emphasis on adjusting levelers during and after assembly suggests that maintaining a level surface is crucial for the table's stability and longevity. Users might need to re-adjust levelers if the table is moved or if the floor settles.
- Cleaning: While not specified, the material of the table top (likely wood or a composite) would typically require cleaning with a damp cloth and mild cleaner, avoiding harsh chemicals that could damage the finish.
In summary, the ARTICLE. FULTON Dining Table is a versatile, extendable dining solution designed for modern homes, offering seating for eight and emphasizing stability and ease of assembly. Its extendable feature provides practical flexibility for various dining needs.
Need help?
General
To Next Page
