2.
Table of Contents
I. Operating Instructions
A. Caution Warnings Page 3.
B. Specifications 3.
1. CLEANING 4.
2. LUBRICATION. Where to oil the machine. 4.
3. HOW TO INSTALL THE NEEDLE 5.
4. HOW TO TAKE OUT THE BOBBIN 5.
5. HOW TO WIND A BOBBIN 5 and 31
6. HOW TO INSTALL THE BOBBIN 6.
7. HOW TO THREAD THE MACHINE 6 and 32
8. ADJUSTING THE STITCH LENGTH 7.
9. THREAD TENSION 7.
10. THE THREAD TAKE-UP SPRING 7.
11. ADJUSTING THE PRESSER FOOT PRESSURE 8.
12. FEED DOG ADJUSTMENT 8.
13. WALKING FOOT HEIGHT ADJUSTMENT 9.
14. SHUTTLE AND NEEDLE TIMING ADJUSTMENTS 9, 9
A, 9B, 10, 11, 12.
15. FEED TIMING ADJUSTMENTS 12.
16. TROUBLE SHOOTING GUIDE 13.
II. Spare Parts List
1. FRAME AND COVER COMPONENTS 16.
2. MAIN SHAFT COMPONENTS 17.
3. NEEDLE BAR & UPPER FEED COMPONENTS 18, 19.
4. PRESSER BAR COMPONENTS 20, 21.
5. FEED MECHANISM 22, 23.
6. HOOK DRIVING SHAFT COMPONENTS 24, 25.
7. TENSION COMPONENTS 26, 27.
8. BOBBIN WINDER & THREAD GUIDE PARTS 28, 29, 33.
9. KNEE LIFTER COMPONENTS 30.
We Strive to Continuously Improve our Machinery. Specifications and features are constantly being updated.
Your New TORO Stitcher may look slightly different then as shown in this pamphlet.
ADDITIONAL INSTRUCTIONS FOR
TORO-3200 BT and TORO 4000 BT
Located on Pages 33 and 35
Table of Contents
To Next Page
Loading...
