Arturia Keylab 49 - Introduction and Initial Connections

8 ARTURIA – KeyLab – USER’S MANUAL
2 KEYLAB OVERVIEW
2.1 First step: Making the connections
Setting up the KeyLab keyboard for use with Analog Lab is fast and simple:
1) First install the Analog Lab program on your computer and be sure to register
and authorize it (see Chapters 2 and 3 of the Analog Lab user manual).
2) Connect the KeyLab keyboard to the computer. KeyLab is powered by its USB
connection, so all you have to do is connect a USB cable from your computer
to the KeyLab controller.
3) KeyLab is a class-compliant USB device, so its driver will be automatically
installed when you connect KeyLab to your computer.
4) Fire up the Analog Lab software and read on!