Arturia Prophet V - Page 27

ARTURIA – PROPHET V - MANUAL
27
Place the joystick at point “A”
 In the same way, place the joystick to the “1” position. To do this, move it to point “B”
corresponding to the B oscillator. Point “B” should be at the 100 value, and the other
points (A, C, and D) should be at the 0 value.
place the joystick to the “1” position
 Next, move the joystick to the position “2”. Move it to point “C” corresponding to the C
oscillator. Point “C” should be at the 100 value, and the other points (A, B, and D) should
be at the 0 value.
Move the joystick to the position “2”
 Now place the joystick at its third position (position “3”). Move it to point “D”
corresponding to the D oscillator. You should have a value of 100 for point “D”, and a
value of “0” for points “A”, “B”, and “C”.