EasyManua.ls Logo

Arturia MatrixBrute User Manual

Arturia MatrixBrute
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
USER MANUAL

Other manuals for Arturia MatrixBrute

Question and Answer IconNeed help?

Do you have a question about the Arturia MatrixBrute and is the answer not in the manual?

Arturia MatrixBrute Specifications

General IconGeneral
TypeAnalog Synthesizer
Modulation Matrix16x16 matrix
ArpeggiatorYes
Sequencer64-step sequencer
LFO3 LFOs
MIDIIn, Out, Thru
USBYes
CV/GateYes
PolyphonyMonophonic
Keyboard49-note with velocity and aftertouch
EffectsAnalog delay
WaveformsSawtooth, Square, Triangle, Sine
ConnectivityMIDI, USB
Headphone Output1 x 1/4"
Power SupplyInternal
FilterSteiner-Parker Filter, Ladder Filter
Audio Input1/4" TS (External Audio Input)
Weight44 lbs

Summary

1. Connections

1. Master Out

1/4" unbalanced stereo line-level outputs for amps, speakers, or audio interfaces.

2. Insert Send/Return

+4dBu TRS jack for external processor loop.

3. CV Ins/Outs

3.5mm control voltage I/O for modular synths.

12. MIDI In/Out/Thru

Standard 5-pin DIN jacks for MIDI connections.

13. USB

USB B jack for connecting to Mac/PC.

2. Getting Started with MatrixBrute

Initial Setup and Registration

Connecting to audio outputs, computer, and initial product registration.

Auto-Tuning the Instrument

Procedure for auto-tuning the instrument for stable analog circuits.

Understanding Digitally-Controlled Analog

How digital controls interact with analog circuitry.

3. Guided Tour

3.3.2. VCF 1

Shaping timbre with the Steiner Filter.

3.3.4. LFO/Aftertouch/Matrix

Routing modulation sources like LFOs and Aftertouch.

4. Operation

4.1. Master Controls

Explanation of Master Volume, Phones, Fine Tune.

4.2. Utility Commands

Using Panel button combinations for utility functions.

4.3. VCOs

Introduction to Voltage-Controlled Oscillators.

4.6. Voice Mode

Explanation of Monophonic, Paraphonic, Duo-Split modes.

4.8. Keyboard Performance Controls

Controls for Glide, Note Priority, Key Hold.

4.10. Mixer

Setting levels and routing for sound sources.

4.12. Filters

Explanation of Steiner and Ladder Filters.

4.13. Envelopes

Explanation of the 4-stage ADSR envelopes.

5. The Matrix

5.2. MOD mode

The electronic patchbay for routing modulation.

5.2.1. Create a modulation path

Steps to assign a modulation source to a destination.

5.3. SEQUENCER Mode

Using the Matrix as a 64-step sequencer.

5.3.0.2. Sequencer transport and Pattern recording/programming

Controlling transport and recording patterns.

6. MIDI

6.1. MIDI Continuous Controller Assignments

Mapping of controls to MIDI CC numbers.

6.2. MIDI Control Center settings

Configuration of MIDI settings via Control Center.

Related product manuals