Then go to www.arturia.com and download the MIDI Control Center software for
Mac and PC. Arturia is constantly improving our instruments, so we ask that you
update to the latest firmware (which you do through this program).
MIDI Control Center is a librarian for presets and sequences, and it's used to
configure the instrument's MIDI settings.
MIDI: In addition to the keyboard, almost all the knobs and sliders send and
respond to MIDI, so you can record and edit them in a DAW. This also makes the
instrument useful as a hands-on controller for other instruments. MIDI can go in
and out the USB port, the 5-pin DIN ports, both, or neither.
For details about which MIDI Continuous Controllers each fader and knob
sends/receives, please see the section on MIDI [p.50].
Auto-Tuning MatrixBrute
Summary: Kbd Track + Panel
auto-tunes the instrument. You'll need to do that
once in a while, more often before it warms up.
6 Arturia - MatrixBrute Manual - Getting Started with MatrixBrute
To Next Page
Loading...
