• Panel + PRESET - Resets the current preset to an initialized voice
(without saving it and overwriting the preset). This is a good starting
point for working with MatrixBrute.
• Panel + MOD - Clears the Matrix (which is the electronic patchbay) of
all modulation routings.
• Panel + SEQ - Resets the current pattern.
• Panel + [Macro knobs, Master Cutoff, MOD Amount] - Resets the 360˚
knob's value to 0.
4.3. VCOs
Unless you bring in external instruments for processing, the raw soundwaves for
the MatrixBrute are generated by its three Voltage-Controlled Oscillators (VCOs).
A fourth oscillator produces random noise waveforms.
Arturia - MatrixBrute Manual - Operation 19
To Next Page
Loading...
