•
Log
requires the least amount of force to play louder notes, but it's
harder to control the dynamics at lower levels;
•
Exponential
is less jumpy at lower dynamic levels, but it takes more
force to reach high dynamic levels.
•
Sequencer/Arp Sends Notes
- (On/Off) The sequencer/arpeggiator can
send MIDI notes to trigger other instruments or to be recorded in a
DAW.
AC Input Specifications
Voltage 100V - 240V AC
Power 45W
Frequency 50-60 Hz
Pedal Connections
Expression Tip = Pot center tap ; Ring = 3.3V ; Sleeve = Gnd
Sustain Normal open
Pedal Connections
Expression Tip = Pot center tap ; Ring = 3.3V ; Sleeve = Gnd
Sustain Normal open
Control Voltages I/O
Arturia - MatrixBrute Manual - MIDI 53
To Next Page
Loading...
