Arturia Prophet V - Page 50

ARTURIA – PROPHET V - MANUAL
50
5.1.2 MIXER
The mixer allows you to set and mix the volume of oscillators A and B as well as the volume of
the white noise module.
The white noise module brings an interesting attribute to sound production. It is notably useful
to create breath effects (in a flute sound for example) or for special effects as in the sound of
wind.
OSC A : volume setting for oscillator A
OSC B : volume setting for oscillator B
NOISE : volume setting for the white noise
Mixer
5.1.3 FILTER
The Prophet 5 emulation possesses a low pass filter module identical to that of the original
Prophet 5. You’ll find all the sonic characteristics that made the original the “must have” of
analogue synthesis!
Filter settings
CUTOFF : setting for the filter cut frequency, tuned from 10 Hz to 25 KHz
RESO : setting for the filter resonance
KBD : manual setting for the keyboard following
ENV AMT : manual setting for the amount of modulation by the filter envelope.
Notice: To set the conventional keyboard following (in relation to the tempered scale) place the knob at its middle
value (1.00).
The filter possesses its own ADSR envelope (see following chapter) to edit its cut-off frequency.
However, these can also be modulated by the LFO (section “WHEEL-MOD” for “wha wha” type
effects), or by oscillator B (section “POLY MOD” for modulation effects in high frequencies or
special effects).