Aruba 518 Series User Manual

Aruba 518 Series Ruggedized Access Point
Installation Guide
Rev 01 | June 2020 1
The Aruba 518 Series access points are high-performance, multi-radio wireless devices that can be deployed in
either controller-based (ArubaOS) or controllerless (Aruba Instant) network environment.
The Aruba 518 Series access points support IEEE 802.11ax standard, delivering high performance with the MU-
MIMO (Multi-User Multiple-Input, Multiple-Output) technology, while also supporting 802.11a/b/g/n/ac wireless
services.
Package Contents
 518 Series access point
 Cable gland x 2
 USB Type-C console cable x 1
 Grounding lug and M4x6 screw x 1
Tools Required
 Phillips screwdriver (#2 for M4x6 screw)
 Flat blade screwdriver (Ethernet cable gland covers)
 8mm allen or hex key (USB console cover)
The weatherproof caps for Ethernet and Console interfaces are connected to the access point, not loose in the
package.
Mounting kits for use with the 518 Series access points are sold separately. Contact your Aruba sales
representative for details.
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton,
including the original packing materials. Use these materials to repack and return the unit to the supplier if
needed.

Aruba 518 Series Specifications

General

Category	Wireless Access Point
Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Frequency Bands	2.4 GHz, 5 GHz
Antenna Type	Integrated
Operating Temperature	0°C to 40°C
Mounting	Wall, Ceiling

Summary

Package Contents

Tools Required

Hardware Overview

External Antenna Connectors

LED Status Indicators

Ethernet Ports

Power Options

Grounding Point

USB Type-C Console Port

Reset Button Functions

Before You Begin

Pre-Installation Checklist

Essential items and network services required before installing the access point.

Installation Location Planning

Identifying RF Absorbers and Interference Sources

Guides on identifying potential RF interference sources like materials and objects.

Access Point Installation Methods

Using the Pre-assembled Bracket

Details on using the default bracket for mounting on ceiling rails, solid surfaces, or wall-boxes.

Using the AP-270-MNT-ADP Mount Adapter

Instructions for attaching the optional adapter for pole or wall mounting.

Grounding the Access Point

Connecting the Ethernet Cable

Installing the Ethernet Cable Gland

Software Configuration

Verifying Post-Installation Connectivity

Electrical and Environmental Specifications

Safety and Regulatory Compliance

RF Radiation Exposure Statement

Wireless Channel Restrictions

Contact Aruba