Aruba 9240 Gateway | Installation Guide Installation | 19
Figure 8 Rack Mount Installation-Mid
Table or Shelf Installation
This mounting option allows mounting the 9240 gateway on a table or shelf.
Required Tools and Equipment
Rubber Feet (included in the kit)
Installation Steps
1. Attach the rubber feet to the bottom of the gateway (see Figure 9).
Leave a minimum of 10 cm (4 inches) of space on the left and right side of the gateway for proper air flow
and ventilation.
Leave additional space in the front and the back of the gateway to access network cables, LED status
indicators, and power cord.
To Next Page
Loading...
