12
3.2.3/ STEP 3: FINE SEARCH
When the screen indicates that you are “3 meters” from
a burial, your device will no longer indicate a direction.
At this point you need two conduct a ne search using a
“cross pattern”.
Example of ne
search technique
1st probing
point
2. Move your device in a cross pattern to locate the point
where the distance reading is the lowest.
Marking function: When you are less
than 3 meters from the burial(s), a
marking icon blinks in the upper right-
hand corner of the screen. Press the
marking button to mark the victim. The
device will start searching for the next
victim without any already marked buri-
al(s) interfering.
In a multi-burial situation, as soon as you mark a victim,
step 1 meter away to prompt the device to more quickly
start searching for the next buried victim. When you mark
a victim, a ag appears next to that victim’s icon.
3.3/ AUTOMATIC REVERT-TO-TRANSMIT
MODE
In the event of a secondary avalanche, the automatic re-
vert-to-transmit mode allows the device to automatically
switch back to transmitting a signal. In search mode, the
device will beep every 8 minutes and the “AUTO-REVERT”
icon will appear on screen asking the user to conrm
they would like to continue in search mode. Press on the
1. Position your device near snow level.
To Next Page
Loading...
