10
• If the distance displayed alternates
between 0.5m and 1.5m, and you are
positioned 1m from the device being
checked, your device will emit a standard
search beep indicating that the transmit
power meets standard requirements.
• If the distance displayed seems
strange, this means that the transmit
power might be faulty and that the de-
vice should be sent to customer service
for further inspection and maintenance.
Make sure that the group leader’s device is also checked
once the group check is nished. Push on the marking
button to switch to transmit mode.
3.2/ RESCUE
3.2.1/ STEP 1: SIGNAL SEARCH
To search for a signal, move through the avalanche de-
bris using one of the two techniques illustrated in the di-
agrams below.
It is important to point your transceiver in the direction of
the avalanche, parallel to the slope. Listen carefully for
the rst signs of a signal while also paying attention to
any visual clues (poles, skis, and clothing). As soon as you
receive a signal, a victim icon appears on the screen.
25m
25m
50m
50m
50m
To Next Page
Loading...
