J
Jason SinghSep 8, 2025
Why are the tires on my AS MOTOR Lawn Mower flat?
- AAshley RoySep 8, 2025
If the tires on your AS MOTOR Lawn Mower are flat, it may be because thorns or sharp objects damaged the tires.
To Next PageTo Next PageWhy are the tires on my AS MOTOR Lawn Mower flat?
If the tires on your AS MOTOR Lawn Mower are flat, it may be because thorns or sharp objects damaged the tires.
What to do if AS MOTOR Lawn Mower engine smokes (4-stroke devices)?
If your 4-stroke AS MOTOR Lawn Mower engine is smoking, it could be due to: * A dirty or oil-drenched air filter. You should maintain or replace the air filter. * The oil level being too high.
Why AS MOTOR Allmaher AS 73 4T B&S engine gets hot?
An AS MOTOR Lawn Mower engine might overheat if: * The ventilation grid is dirty. You should clean the ventilation grid. * For 4-stroke devices: the oil level in the engine is too low. Refill engine oil.
What to do if AS MOTOR Allmaher AS 73 4T B&S has uneven cut, and lawn becomes unsightly?
If your AS MOTOR Lawn Mower is leaving an uneven cut and the lawn looks unsightly, consider the following: * The blade may be dull or worn. * The speed might be too high relative to the cutting height. Reduce the speed and/or select the correct cutting height. * The mower housing might be heavily contaminated. Clean it. * The tire pressure may be different. Check the tire pressure.
General| Brand | AS MOTOR |
|---|---|
| Model | Allmaher AS 73 4T B&S |
| Category | Lawn Mower |
| Language | English |
Emphasizes reading instructions and familiarizing with controls and safe handling.
Details who should not operate the device and age/condition requirements.
Provides crucial safety guidelines for handling flammable fuel to prevent hazards.
Details on avoiding injury during startup, blade/motor running, and burns.
Essential steps before mowing, including PPE and area preparation.
Safety advice during mowing, focusing on ejected objects and safe distances.
Explains the function and operation of the blade clutch lever.
Describes how to operate the drive lever and parking brake.
Details the accelerator/throttle levers for engine speed and choke function.
Using the stop switch and start button for engine operation.
Adjusting blade speed, differential lock, and fuel supply.
Fuel mixture requirements and AS-Motor recommendations for 2-stroke engines.
Safety warnings and general guidance before performing maintenance.
