EasyManua.ls Logo

AS MOTOR AS 1000 OVIS RC User Manual

AS MOTOR AS 1000 OVIS RC
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator's Manual
Remote control mower
AS1000OVISRC
From serial number: 038722120001
Issued: 01.03.2023, V2.0
en-Translation of the Original Operator's Manual

Table of Contents

Questions and Answers:

AS MOTOR AS 1000 OVIS RC Specifications

General IconGeneral
BrandAS MOTOR
ModelAS 1000 OVIS RC
CategoryMotorized Toy Car
LanguageEnglish

Summary

Introduction and Safety Information

Intended Use and Contact Details

Describes device purpose, limitations, and support information.

Symbols and Warnings

Understanding Hazard Symbols and Labels

Explains hazard levels, signal words, and device safety signs.

Device Identification

Type Plate Information

Details the information provided on the device's identification plate.

Safety Instructions: General Guidelines

User Restrictions, Fuel, and Fire Safety

Covers user limits, fuel handling, first aid, and fire safety.

Safety Instructions: Operation

Pre-Operation Checks and Operational Hazards

Details checks before use and operational risks.

Preparing for Mowing

Personal Protection and Area Preparation

Specifies PPE and clearing the mowing area.

Slope Operation and Tipping Hazards

Safe Slope Driving and Tipping Risks

Instructions for inclines and tipping hazards.

Post-Operation and Maintenance Safety

Shutting Down and Cooling

Instructions for stopping and cooling the device.

Safe Maintenance Practices

Safety advice for maintenance tasks.

Device Description

Controls on Device and Transmitter

Identifies and labels components on the main unit and remote control.

Main Unit Controls

Switches, Levers, and Indicators

Explains main switch, choke, emergency stop, fuel valve, speed, and status.

Main Unit Controls (Continued)

Blade Clutch and Cutting Height Adjustment

Explains blade engagement and cutting height adjustment.

Transmitter Operation

Transmitter Controls and Functions

Lists all controls and their functions on the remote.

Signals and Safety Features

Audible, Visual Signals, and Safety Functions

Describes device signals and built-in safety mechanisms.

Mowing Preparation and Battery

Pre-Mowing Checks, Fuel, and Battery

Covers checks, fuel, and transmitter battery management.

Starting Procedures

Transmitter Battery Check and Cutting Height

How to check/replace transmitter batteries and set cutting height.

Powering On and Radio Setup

System Power-On and Frequency Selection

Step-by-step guide to power up and set radio frequency.

Engine Start and Training

Starting the Engine and Initial Training

Steps to start the engine and initial practice procedures.

Movement Controls

Steering and Driving Operation

How to control direction, turning, and speed of travel.

Mowing Operation

Speed Limiting, Slope Driving, and Blade Engagement

How to set speed, operate on slopes, and engage the blade.

Stopping and Emergency Procedures

Safe Shutdown and Emergency Stop

Procedures for stopping, parking, and using the emergency stop.

Transporting the Device

Loading, Unloading, and Securing for Transport

Steps for safely loading and unloading.

Maintenance: Initial Inspections

General Inspection and Safety Checks

Routine checks for safety and security of components.

Maintenance Overview

Scheduled Maintenance Tasks and Intervals

Overview of maintenance tasks and their frequencies.

Maintenance: Component Checks

Checks for Switches, Drives, and Batteries

Checking start-stop switch, hydrostatic drive, and battery.

Maintenance and Cleaning Procedures

Device Positioning and Cleaning Procedures

Positioning for maintenance and cleaning key parts.

Maintenance: Functional Checks

RC and Steering System Checks

Testing RC functions and steering adjustments.

Maintenance: System Integrity Checks

Emergency Stop, Brake, and Blade Checks

Verifying emergency stop, parking brake, and blade/shaft integrity.

Blade Maintenance

Changing Flail Blades and Fastenings

Procedures for replacing flail blades and checking mountings.

Chain and Clutch Maintenance

Blade Brake Clutch and Chain Checks

Verifying blade brake clutch and chain tension.

Engine and Battery Care

Engine Oil, Air Filter, and Battery Charging

Engine oil, air filter, and battery charging procedures.

Mechanical Systems and Assembly

Battery Exchange, Hydrostat, and Lubrication

Procedures for battery, hydrostat, and grease lubrication.

Storage, Parts, and Disposal

Device Storage, Spare Parts, and Disposal

Guidelines for storing, ordering parts, and disposing of the device.

Troubleshooting: Starting Issues

Common Problems and Engine Start Issues

Diagnosing general faults and engine start problems.

Troubleshooting: Engine and Cutting Performance

Engine Operation and Cutting Quality Issues

Problems with engine running, noise, and cutting performance.

Troubleshooting: Device Movement and Chains

Movement, Shut-off, and Chain Issues

Problems with device movement, stopping, and chain detachment.

Troubleshooting: Errors and Radio

Error Codes and Radio Transmission Issues

Explains error codes and radio communication problems.

Technical Specifications

Device Specifications and Performance Data

Lists technical data like type, engine, dimensions, and sound levels.

Fuses

Fuse Identification and Ratings

Lists fuse positions, ratings, and their supplied components.

Accessories

Optional Accessories

Lists optional accessories available for the device.

Declaration of Conformity

EC Conformity Statement

Declares compliance with relevant EC safety and health directives.

Company Information

AS-Motor Product Range Overview

Describes different types of mowers and equipment offered.