To Next PageTo Next PageHow to improve bad brushing results of AS MOTOR AS 730 EcoBrush?
For bad brushing results with your AS MOTOR Blower, first, ensure the brushes are mounted correctly, paying attention to the working direction. If the brush pressure is too high, readjust the castor wheel to reduce it. Also, make sure you are using original manufacturer's brushes with black/white bristles.
Why AS MOTOR Blower leaves unbrushed central ship?
If your AS MOTOR Blower leaves an unbrushed central strip, it could be due to worn brushes with the ejection direction set forwards. Try turning the brushes to the right or left so the ejection direction is to the side. If the brushes are worn, consider replacing them.
Why snow is brushed to the rear by brush of AS MOTOR Blower?
If the AS MOTOR Blower brush is brushing snow to the rear, it might be because the snow is too deep; the blower is designed for snow up to 14 cm deep. If the snow is packed too hard, swivel the brush fully to the left or right. Also, if the ejection direction is forwards and snow is piling up in front of the machine, swivel the brush to the left or right for side ejection.
How to improve low traction in winter of AS MOTOR Blower?
General