ENV
Gate 1v to 12v positive gate.
Trig/Retrig 1v to 12v positive pulse.
Output Voltage Zero to 10v (approx).
Attack Time 5ms to 7.5 seconds.
Decay Time 5ms to 15 seconds.
Sustain Level Zero to 100%.
Release Time 5ms to 15 seconds.
MIDI to CV Convertor
High spec For internal and external CV controls.
Channels 1 - 16.
CV 1 - 2 + and - 5v.
Gate + 10v.
Trig + 10v - 10ms.
Velocity 0 - 5v.
After Touch 0 - 5v.
MOD Wheel 0 - 5v.
Breath + and - 5v.
Expression + and - 5v.
S - Trig 10 - 0v.
Burn-In Before final calibration units are burnt-in for a minimum of 96 hours.
Power Requirements UK: 230v AC 50 Hz (220v - 240v).
Export: 115v AC 60Hz (100v - 120v).
Internal Supply +/- 12v DC 90 mA.
AC Voltage Select SPAWN has an ‘AC V. SELECT’ switch. It is imperative that this is set correctly.
Failure to do so will void warranty and damage the unit beyond repair.
Warranty SPAWN comes with a 12 month (from purchase date) back-to-base warranty, (i.e.
customer must arrange and pay for carriage to and from Analogue Systems).
21
To Next Page
Loading...