AS SPAWN User Manual

Controls Rate, LED, and outputs SAW+, SAW-, SQR, TRI waveforms.

Allows external voltage control of the VCLFO rate.

Adjusts initial frequency, octave range, and tuning.

Controls frequency modulation depth and type from VCLFO/Envelope.

Primary IV/OCT input and Portamento/Lag settings.

Pitch modulation input and waveform sync functionality.

Selects the primary waveform shape from sawtooth to pulse.

Modulates wave shape using VCLFO or envelope.

Controls waveshape externally via dedicated socket.

The main audio output signal from the VCO.

Controls cut-off frequency and resonance for filtering.

Modulates filter cut-off with LFO/Envelope.

Primary CV input for filter frequency tracking.

Mixes VCO signal, Sub Octave, and Noise levels.

Generates white noise and accepts external audio signals.

Controls VCF signal level and amplification via envelope.

Linear and logarithmic modulation inputs for VCA gain.

Accepts external signals and provides final VCA output.

Controls Attack, Decay, Sustain, and Release stages.

Controls envelope modes and provides ENV OUT.

Sets internal MIDI signal paths to SPAWN modules.

Routes MIDI CV signals to VCO and VCF.

Uses MIDI Expression, Gate, and Trigger for control.

Outputs control voltages for MIDI Velocity, After Touch, Mod Wheel.

Outputs control voltages for MIDI Breath, Expression, S-Trig.

Connects to MIDI devices and allows daisy-chaining.

Selects the MIDI channel for SPAWN to receive.

Detailed technical parameters for VCLFO and VCO.

Detailed technical parameters for Source Mixer and VCF.

Detailed technical parameters for VCA and Envelope Generator.

Specs for MIDI/CV converter and burn-in procedure.

Power supply details and warranty information.

Blank diagrams for planning signal and modulation routes.

Control positions to deactivate all internal signal and modulation routes.

Visual guides for internal signal and modulation pathways.