To Next PageTo Next Page
Need help?Do you have a question about the Asami AMV5-O224 and is the answer not in the manual?
General| Brand | Asami |
|---|---|
| Model | AMV5-O224 |
| Category | Air Conditioner |
| Language | English |
Identifies and illustrates the main components of the outdoor unit.
Lists various combinations of outdoor units based on model numbers.
Details the number of indoor units connectable to each outdoor unit model.
Specifies the ambient temperature ranges for cooling and heating modes.
Lists standard parts supplied with the unit for installation.
Guidelines for selecting an appropriate installation location for the unit.
Specifies required clearance for a single outdoor unit module configuration.
Specifies required clearance for a dual outdoor unit module configuration.
Specifies required clearance for a three outdoor unit module configuration.
Specifies required clearance for a four outdoor unit module configuration.
Details clearance needed when walls or obstructions are present above the unit.
Specifies clearance for multiple outdoor unit configurations.
Guidance on positioning the unit relative to seasonal wind direction.
Advice on unit placement considering snowfall.
Specifies requirements for refrigerant piping installation.
Outlines physical dimensions and mounting hole details for specific outdoor units.
Details on connecting refrigerant pipes between units.
Procedures for installing refrigerant connection pipes.
Procedures for system air purging and refrigerant charging.
Instructions and precautions for electrical wiring.
Information on system communication setup and components.
Procedures for establishing system communication.
Diagrams illustrating external electrical wiring connections.
A checklist of essential items to verify after installation.
Procedures and considerations for the initial system trial run.
Steps to take before starting the trial run process.
Detailed steps and notices for conducting the trial run.
Important notes and considerations during the trial run phase.
Explains the different modes for system debugging.
Normal operational parameter ranges for system debugging.
Lists common malfunctions, their reasons, and suggested measures for resolution.
Instructions for cleaning the outdoor heat exchanger.
Guidance on checking and maintaining the drain pipe.
Pre-seasonal checks for proper unit operation.
Steps for maintenance after the unit has been out of use.
Information on purchasing and replacing unit parts.
