1asberprofessional.com
MACHINE INTRODUCTION
1.1 INTRODUCTION TO MACHINE& MODELS
All equipment manufactured by ASBER is for use with the type of gas specified on the rating plate
and for installation will be in accordance with National Fuel Gas Code ANSI Z223.1 (latest edition)
Instruction to be followed in the event the user smells gas shall be posted in a prominent location.
This information shall be obtained by consulting the local gas supplier.
PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCES.
This equipment is design engineered for commercial use only
1.2 IMPORTANT SAFETY INFORMATION
WARNING: Improper installation, adjustment, alteration, service or maintenance
can cause property damage, injury or death. Read the installation, operating and
maintenance instructions thoroughly before installing or servicing this
equipment.
FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors or
liquids in the vicinity of this or any other appliance.
1.3 SPECIFICATION CHART
MODEL
AT 10’’
W.C.
ORIFICE
SIZE LP
AT 5’’
W.C.
ORIFICE
SIZE NG
BURNERS ALTITUDE
SALAMANDER
AESB-24
20,000 56 20,000 50 1
AESB-36
40,000 56 40,000 50 2
CHESSE MELTER
AECM-24
20,000 56 20,000 50 1
AECM-36
40,000 56 40,000 50 2
To Next Page
Loading...
