Ascend JFD-48F - ASCEND Refrigerator Settings; Refrigerator Parameter Definitions

ASCEND® Refrigerator Settings
Temperature set to 37 F
Parameter Function    Set Range  Default
E1  Lower Setpoint Limit   -40 F ~ set temp 36 F
E2  Higher Setpoint Limit   set temp ~ 120 F 45 F
E3  Hysteresis, temp. variance  1 ~ 18 F  10 F
E4  Comp. start delay time   0 ~ 10 min.  2 min.
E5  Offset on room temp   -5 ~ 5 F   0 F
E6  Offset on evap temp   -5 ~ 5 F   0 F
F1  Max. defrost duration   1 ~ 60 min.  N/A
F2  Defrost interval time   0 ~ 24 hr.  0
F3  Defrost termination temp  32 ~ 68 F  N/A
Key
F = Farenheit (degrees)   temp = temperature
min. = minutes    max = maximum
hr. = hours    N/A = not applicable
Warning:
Do not change the default settings of your Ascend® unit
without consulting a qualified service technician or the
Ascend® service department.
-9-
Applicable to Models: JFD-23R, JFD-48R,
JFD-72R