The ASCONPOOL BUGSON Model HJ3172 is a cordless robotic pool cleaner designed for efficient and energy-saving cleaning of swimming pools. It automatically cleans both the walls and bottom of the pool without requiring water replacement, making it an environmentally friendly solution.
Function Description:
The cleaner operates autonomously, moving across the pool floor and climbing walls (specifically, the front side with the indicator will climb) to remove debris. It is powered by a rechargeable lithium battery (12.1V, 8.6Ah). Upon startup, the cleaner detects and calculates the pool size before initiating its cleaning cycle. When the cleaning cycle is complete, the cleaner will move to the pool edge for easy retrieval.
Important Technical Specifications:
- Model: HJ3172
- Power Source: Rechargeable lithium battery (12.1V, 8.6Ah)
- Charger Input Voltage: 100VAC-240VAC
- Charger Input Frequency: 50Hz/60Hz
- Max. Charging Voltage: 12.6VAC
- Charging Current: 1.8A
- Running Time (per full charge): Max. 90 minutes (1.5 hours)
- Flow Rate: Max. 10m³/h (approx. 2642 gal/h)
- Filter Density: 180μm
- Running Speed: Max. 11m/min (approx. 36 ft/min)
- IP Grade: IPX8
- Max. Water Depth: 2m (approx. 6.6 ft)
- Working Temperature: 10°C (50°F) - 35°C (95°F)
- Charging Temperature: 10°C (50°F) - 40°C (104°F)
Usage Features:
- Operation:
- To start, place the cleaner into the pool with its bottom facing a wall. Hold the top handle and switch it ON. The cleaner will begin working after 20 seconds, during which it empties trapped air to ensure proper immersion and operation.
- The cleaner features a single switch button for power ON/OFF.
- An indicator light provides status updates:
- Blue light steady on: Power on.
- Green light flashes: Cleaner is working.
- Yellow light flashes: Low battery and self-parking initiated.
- Yellow light steady on: Self-parking finished.
- After cleaning, the cleaner moves to the pool edge, allowing for retrieval using a hook.
- Charging:
- Before charging, switch OFF the cleaner (indicator off) and dry the charging port.
- Charge the cleaner indoors, at least 3m (approx. 10ft) away from the pool edge.
- The charger indicator provides charging status:
- Green light steady on: Waiting for charging, battery not plugged in, or charging finished.
- Red light steady on: Battery is being charged.
- Red light flashes: Low battery or battery damaged.
- Avoid overcharging to prolong battery life. Do not use the charger if the cord is damaged.
- Ensure the environment temperature for charging is between 10°C (50°F) and 40°C (104°F).
Maintenance Features:
- Filter Cleaning:
- After each use, the filter basket in the cleaner should be cleaned.
- To access the filter, remove the robot from the pool and open the top cover.
- Take out the filter basket.
- Wash the filter basket thoroughly.
- Re-install the filter basket by reversing these steps.
- Storage:
- If storing the cleaner for a long period (over 6 months), ensure it is charged to maintain battery life.
- Store the cleaner in a cool, ventilated place, away from direct sunlight.
Safety Precautions:
- Do not permit children to operate the cleaner or use it as a toy.
- Do not enter the pool while the cleaner is in the water.
- Do not switch on the cleaner when it is out of water.
- Do not use the cleaner if the water temperature is above 35°C (95°F) or below 10°C (50°F).
- Use only identical replacement parts for servicing. Do not attempt to repair the cleaner or charger yourself.
- Do not charge any other devices with the provided charger.
- Connect the charger to a receptacle protected by a ground fault circuit interrupter (GFCI).
- Never open the power kit.
The product comes with a 24-month warranty from the date of original purchase, covering manufacturing defects. The warranty is void if the product has been altered, misused, or damaged due to mishandling, chemicals, fire, poison, liquid, natural disaster, or third-party actions. A sales invoice is required for any warranty claims or repairs.
Need help?
General
To Next Page